Replacing the Jar Ring on the Freedom Filter

Contents       Disassembling the Pump Assembly

1. To replace the jar ring it is "NOT" neccessary to remove
the main Casting from the Freedom Filter motor.

2. Remove the old jar ring from the casting.

3. Heat the new jar ring to about 150 degrees
Fahrenheit by running hot tap water over it.

4. Hold the jar ring against the side of the main casting (Fig.18).
with the jar ring still hot, you will be able to force it over the
rim of the casting into its proper position.

Fig. 18
Fig.18 Fig.18 Fig.18

Next : Disassembling the Pump Assembly

  

© Copyright 2002 by Vortex Innerspace Products, Inc. All Rights Reserved.
All logos, graphics, marks and text are the sole property of Vortex Innerspace Products, Inc.